Our Best 3D Printer Controller – Top 12 Model Reveled!

best-3D Printer Controller

Are you looking for a 3D Printer Controller l for the money, you're in luck? The best ones can typically be found for you. However, before you buy one, be sure to read the reviews and ratings to make sure it's the right one for you. Here are some of the Best 3D Printer Controller models available today.

Here we listed a high-quality, affordable 3D Printer Controller, here you can find a great one. It's been in the market for over lots of years and has received many reviews of excellence. If you're thinking of making changes to your 3D Printer Controller or if you just want to get a better product, read on.

Follow This Table For Quickly Selection A Best Product

Our top 12 Best 3D Printer Controller Reviews in 2022

Bestseller No. 1
BIGTREETECH Upgraded SKR Mini E3 V3.0 Silent Board 32bit Mainboard Integrated with TMC2209 Stepper Driver Support Marlin/Klipper Firmware Compatible with Ender V2 Ender 3 Pro/5 3D Printers
  • 🌟【High Compatibility】SKR MINI E3 V3.0 Control board compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
  • 🌟【Multiple Functions】It Supports BLTouch, RGB lights, blocking detection, shutdown function. What ’s more, it also supports TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.
  • 🌟【Superior Heat Dissipation Performance】New Upgraded SKR MINI E3 V3.0 main board is equipped with a large Aluminum heat sink of stepper motor driver instead of pieces small heat sink, this design is able to increase the heat dissipation performance of the motherboard by 20% which greatly strengthen the heat dissipation capacity of the driver totally.
  • 🌟【Firmware Update】Compatible with Marlin and Klipper firmware. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard,copy and save it to SD card , firmware must bed reserved, then re-plug the SD card and wait to 10s. The n firmware has been successfully updated. Note: Our control board come without SD card.
  • 🌟【TMC2209 Drivers】SKR MINI E3 V3.0 mainboard adopts ultra silent TMC2209 stepper motor driver, it generates lower heat and it has a large-area cooling position to lower the temperature when driver working. Meanwhile, it adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.
Bestseller No. 2
FYSETC 3D Printer Vorn 2.4 Big Dipper Motherboard New Upgrade Silent Control Board Based on Due 3 Mini 5+ WiFi with TMC2209 Stepper Motor Drivers Onboard for Vorn V2.4 V0.1 3D Printer CNC Machine
  • A combination of duet3 mini5 + and Mini 2 +, for Mini 12864 LCD or 5i Smart Disply screen. For Vorn printer. Max input 28V. The firmware has been burned, only need to Set up your printer and update the firmware through the web interface. Support Wif and Ethernet by replacing the module for the switching. Supports external antenna.
  • Its main control chip and pin allocation are completely consistent with mini5 +. Based on same54p20 (arm cortex M4 @ 120mhz), it is fully compatible with duet3 mini5 +.
  • Upgrades on the power supply and IO protection, Input / output IO full with TVS protection, Automobile fuses( for hot bed input and main power input), all make it safer and more stable.
  • Size: 148.5 x 87mm. XH2.54 connectors, 7x PWM power MOSFET output, On board TF card slot, 2x4 row pin lead out for external SD card module, Type-C USB socket. Based on the good performance of RRF firmware and the on-board 7-axis (7pcs tmc2209 stepper motor driver), the board can be easily configured for a variety of models, such as Vorn series, multi z-axis models, dual x models, etc.
  • Package includes: BIG-DIPPER Motherboard x 1, Gray Cable x 1, External Antenn x 1, Heat Sinks x 7. If you have any questions, you can contact us via Amazon. We will help you to solve the problem which you meet. Thanks for your support and understanding.
Bestseller No. 3
BTT Octopus V1.1 32Bit 3D Printer Controllers Supports Klipper and Marlin, Compatible TMC2209/TMC2208/TMC5160/TFT35 E3 V3.0/PI TFT50/BL Touch and Compatible Raspberry Pi Voron 3D Printer ect
  • 【High Performance Chip】BIGTREETECH Octopus Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.Supports running Klipper and Marlin.
  • -【Multiple DIY Ports】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board;Supports up to 4 hotend heaters;Provides separate power inputs for motors, bed heating and logic/fans/hotends.Up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan.
  • 【Flyback protection on PWM fan ports 】Many people find that their fan ports become damaged after some time when using larger fans. This is because of the inductance in the fan coils. The octopus includes flyback protection on each fan port which will protect the FETs from damage caused by turning the fans on and off.
  • 【Wide Compatibility】Supports all versions of BIGTREETECH TFT screens and LCD12864 screens;Support TMC2209/TMC2208/TMC5160 and other step silent drivers;Supports multiple languages such as English and Simplified Chinese and can easily switch between different languages ;Provides an RGB LED interface.
  • 【Efficient heat dissipation】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Up to 6 PWM fans and 2 always-on fan,it can speed up the cooling of the motherboard.
Bestseller No. 4
Makerbase MKS Robin Nano 32Bit Control Board 3D Printer Parts Based on Marlin2.x Klipper 3.5inch TS35 Touch Screen with 5pcs TMC2209 uart Support WiFi Module (Nano V3)
  • Support Marlin2.X firmware,32-bit 168MHz MCU STM32F407VGT6
  • Support TF Card,USB Disk,Virtural USB Device,PWM TTL,Power TVS Protect
  • 3.5 inches Touch screen Support 3 types of UI
  • With TS35 Touch screen,Robin WIFI and 5pcs MKS TMC2209
SaleBestseller No. 5
BIGTREETECH Direct SKR 2 32 Bit 3D Printer Controller + 5pcs TMC 2208 V3.0 Stepper Motor Driver Upgrade SKR V1.4 Turbo Suit for Ender 3 BIQU B1 3D Printer STM32F429VGT6
  • 【Control Chip】: Uses a 32-bit ARM Cortex-M4 series STM32F429VGT6 main control chip with a core frequency of 168MHz that packs enough performance to run even the most demanding UI while ensuring stutter free printing.
  • 【Integrates Power Regulator】: Integrates a AOZ1284PI power regulator which supports 12-24V power input and a maximum output current of 4A – enough to power external components such as LEDs and even a raspberry pi.
  • 【Heater Protection Circuit】: Includes an additional heater protection circuit which protects against runaway heating on the bed and hotend heaters. By default, the heaters are off so if the MCU or MOSFETs are damaged, the heaters will shut down instead of enter into thermal runaway.
  • 【Motor driver】: Support TMC5160, TMC2209, TMC2225, TMC2226, TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988,tmc2100 etc., and can be externally connected to a motor drive,Drive working mode support: SPI, UART, STEP/DIR.
  • 【Note】: Before DIY firmware modification, customers need to build an STM32F429VGT6 version environment on the compilation platform for compilation and use, instead of directly using the previous F407 firmware.For more information,please search bigtreetech github.
Bestseller No. 6
3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit
  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
Bestseller No. 7
BALITY 3D Printer Controller Kit, RAMPS 1.4 Controller, MEGA Board for R3, Soldered BALITY5kya1svfh73898 0
  • LOW COST: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • SPACE FOR EXPANSION: RAMPS interfaces an Mega with the powerful MEGA platform and 3D printer controller kit has plenty room for expansion
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • TOP OF STACK: Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • USB DOWNLOAD: 3D printer control board with the boot-loader, download the program directly via USB without having to go through other external writer
SaleBestseller No. 8
BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.2 Stepper Motor Driver DIY for Voron V2.4 3D Printer Controller Board Support Klipper Raspberry Pi
  • ⭐SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware
  • ⭐SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better.
  • ⭐MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card
  • ⭐ULTRA-QUIET DRIVER: TMC2209 v1.2 with SpreadCycle technology, enables high precision cycle-by-cycle current control for the highest dynamic motion. Large area thermal pad to reduce the temperature of the drive during operation. The motor is difficult to lose step. Can prevent motor vibration. The module supports STEP/DIR and UART modes.
  • ⭐WORRY-FREE AFTER-SALES SERVICE: Do you have any questions? Or if you have any problems that need to be solved, please feel free to contact us, and we will arrange the most professional technical team to solve it for you until you are satisfied.
SaleBestseller No. 9
BIGTREETECH Direct Octopus V1.1 32 Bit Silent Controller Board + PI TFT50 V2.0 5 Inch Display Support TMC2209 TMC2208 3D Printer Parts DIY Kit
  • 🐙【Main Control Chip】:Octopus V1.1 control board uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz
  • 🐙【Firmware】:Supports running Klipper and Marlin;Includes a bootloader that allows firmware upgrades via the SD card. This offers a simple, efficient, and convenient way to update the firmware.
  • 🐙【Stepper Motor Driver】:Supports up to 8 stepper drivers with 9 stepper driver outputs in total,Support STEP/DIR,UART,SPI MODE.Note that if you use an A4988 or a DRV8825 driver, you must connect RST and SLP.
  • 🐙【Highlight】:Thermistor input protection. This allows you to short a thermistor input directly to a voltage source up to Vin without causing damage to the motherboard.
  • 🐙【Packing List】: Octopus V1.1 Control board + PITFT50 V2.0 Touch screen with dual modes(with a cute rubber duck),for more information,please search bigtreetech at GitHub, or contact us via Amazon. We'll be willing to help you with reliable solutions.
SaleBestseller No. 10
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
Bestseller No. 11
OSOYOO 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino RepRap
  • 3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • With LCD 12864, you can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
  • It is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • Please Note : No technical support for this product.
Bestseller No. 12
ALMOCN 3D Printer Reprap Smart Controller LCD 12864 Graphic Smart Display Controller Board with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit
  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display.
  • LCD 12864 graphic smart display module with blue backlight, Small and light appearance, it is easy and convenient to use.
  • Using a large screen 12864LCD (3.2'), it can support 8 GB.
  • Print your 3D designs without PC, just with a g-code design stored on the SD card.
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.

Thing to Consider Before When Buying best 3D Printer Controller

If getting the 3D Printer Controller is what you aim for, just the reviews will not be sufficient. To properly scrutinize the offering, you would also need to keep a couple of essential factors in mind. And the factors that we are referring to here are:

Build Quality

The first thing that you would need to consider is the build quality. Here, the better the build quality, the better the performance will be. Also, a better build also means a higher lifespan. In other words, the ones that feature the construction of high-quality materials will last for an extended amount of time.

Brand value:

A popular brand always provides the best quality product. That's why when we want to select a product we must focus on reputed brands.

Feature and specification:

We know one thing; everyone wants in products update feature and best specification. We are trying to make a list with higher Features and specifications for customer satisfaction.

Customer Ratings:

The customer gives a rating after satisfaction. So customers rating is also the most important thing that we take into consideration while choosing the best products.

Customer Reviews:

Ratings can be manipulated and we don't think this could be the only thing considered. To avoid mistakes, we consider going through real users reviews to select the best Brake pads for slotted rotors.

Value for money:

An expensive product may not be always good. Rather, it could be like wasting your money. We always keep this in mind and avoid over-priced Brake pads for slotted rotors products on the list.

we have collected all kinds of information from Amazon. Amazon is the most-trusted and perfect source for this.

Also, we are taking help from the Ai system because AI is helping us save time, still, we are human beings working behind the scene to ensure satisfaction for our readers.

The products aren't picked randomly. We research products and make the best product list following perfect criteria. So, you can purchase it with trust. Thank you.

Conclusion

You should have found the best 3D Printer Controller for suitable you. Our detailed buying guide and review section should have made it much easier to pick the perfect product for yourself.

However, if you are still having trouble figuring out which is the correct one for you, we suggest that you go to the 3D Printer Controller. All the products in our article excel in business, but the PN offers all the pros minus most of the cons.

Leave a Comment

Your email address will not be published.